Connecting To A Macintosh Powerbook - Microtek CX4 User Manual

9. Remove the mouse cable from the Mac Mouse port, and connect the Mac
Mouse Cable to the Mac Mouse port.
10. Connect the other end of the Mac Mouse Cable to the PS/2 mouse
connector of the Control Cable.
You may connect your computer to the USB interface of the projector so to enable
the function of the wireless mouse on the remote control. Please follow the step
numbered 11 for connection.
11. Connect one end of the USB Cable to the USB port of the projector, and
connect the other end of the USB Cable to the USB port of your computer.
12. Tighten all connector screws to ensure secure connections.

Connecting To A Macintosh PowerBook

Before connecting this projector to a Macintosh PowerBook, make sure that both
machines have the power shut off.
1. Set the DIP switches of the Mac adapter in accordance with the desired
resolutions (i.e. 19" mode)
2. Connect one end of the Mac Adapter to the PowerBook Monitor Out port.
3. Tighten all connector screws to ensure secure connections.
4. Connect the other end of the Mac Adapter to the Computer Cable.
5. Connect the other end of the Computer Cable to the Computer In port of the
15