Getting Started; Attaching The Strap; Loading The Battery - Microtek MV300 User Manual

Getting Started

Attaching the Strap

1. Thread the end of the strap
through the DV camera strap
ring as shown.
2. Fasten the two ends of the
strap as shown.
3. Attach the grip belt to the
strap as shown.

1. Loading the Battery

1. Ensure the DV camera is
turned off; then push the
sliding battery case
indicated by the arrow to
open the battery cover.
2. Insert the battery into the
compartment.
Ensure that the battery is
inserted properly with the
Mylar pull tab held down.
3. Hold the battery in place
and close the battery cover
securely.
11