Inserting An Sd Card; Using The Lcd Screen - Microtek MV300 User Manual

Inserting an SD Card

You can install an SD memory card in your DV camera
to increase the memory capacity. Follow the
instructions below to install an SD card.
1. Open the SD card
compartment door on the
bottom of the DV camera.
Ensure that the DV camera is
turned off.
2 Insert the SD card (not
included) into the
compartment until you
hear a "click".
Ensure that the orientation
of the SD card matches the
SD card marking in the SD
compartment.
3. Close the SD card
compartment door.

Using the LCD Screen

The LCD screen can be used to frame your images
during shooting video or still images.
1. Swing to open the LCD
screen. The LCD screen can
be opened up to 90 degrees.
2. Adjust the viewing angle.
The LCD screen moves up
to 90 degrees to the
viewfinder side and up to
180 degrees to the lens
side.
When you adjust the angle of
the LCD screen, ensure the
LCD screen is fully opened.
3. Close the LCD screen.
When closing the LCD screen,
make sure the LCD screen is
set in the vertical position.
13