Toyota Prius Owner's Manual page 552

5-2. Steps to take in an emergency
STEP 8
STEP 9
552
PRIUS_OM_OM47A19E_(EE)
Connect the bottle to the com-
pressor.
Connect by inserting the bottle
straight into the compressor, and
make sure that the protruding part
of the bottle is properly aligned
with the groove in the case.
Attach the 2 stickers as shown.
Remove any dirt and moisture
from the wheel before attaching
the sticker.
If you are unable to apply the
stickers, inform
authorized Toyota dealer, tire
dealer or repairer, or another duly
qualified and equipped profes-
sional that sealant has been
applied to the puncture when hav-
ing the tire repaired or replaced.
the nearest