Rear View Video Monitor System - Fleetwood 1999 Discovery Parts And Service Manual

Your motor home is equipped with a rear view video monitor
system. The camera is located at the top rear of the motor
home. The rear view picture is displayed on a video monitor
screen. The monitor screen may be overlaid with a distance
scale reference which gives approximate distance of objects
to the rear of the motor home.
To operate the video monitor:
1. Turn on the ignition switch.
2. Shift the transmission to R.
To override normal operation, the ignition switch must be on
and power must be on at the monitor.
Using the video monitor will take practice. Always allow
more space for maneuvering until you are comfortable with
the system. Check the side-mounted mirrors often while dri-
ving and especially during lane changes and when backing
up.
The camera lens is exposed to road dirt and will get dirty
often. When necessary, clean the camera lens and monitor
screen with a quality glass cleaner and nonabrasive cloth or
towel.
In keeping with good engineering practice, and to meet the
requirements of chassis manufacturers, certain chassis and
underbody components of your motor home have been coat-
ed with an undercoating material. This material is intended
to assist in protecting these components from corrosion or
other effects of weather and road conditions. Please be aware
that certain areas of the motor home do not have undercoat-
ing applied.
DiSCOVERY
ON ThE
ROAd
REAR VIEW VIDEO
MONITOR SYSTEM
CAUTION
The rear view video mon-
itor system provides a
general view of the road
and objects to the rear of
the motor home. Your per-
ception of this view and
the relationships of ob-
jects to the motor home
and each other will be dif-
ferent from that seen in a
rear view mirror. Light
conditions and the ad-
justment of the screen
controls will also affect
your perception. Always
use the side-mounted
rear view mirrors with the
video monitor system.
BODY
UNDERCOATINC