Specifications; Legal Notices - Insignia NS-L19X-10A User Manual

19" lcd tv with decorative faceplates
Hide thumbs Also See for NS-L19X-10A:
Table of Contents

Advertisement

Specifications

Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
LCD
TV type
19-inch TFT LCD
TV panel
NTSC-M, ATSC
TV system
VHF: 2 - 13
Channels
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2 - 69
BTSC system
Audio multiplex
5W × 2
Audio output
AC 120 V, 60 Hz
Power requirement
35 W
Power consumption
18.1 × 12.5 × 9.84 inches (19")
Dimensions
(460 × 318 × 250 mm)
10.14 lbs. (4.6 kg)
Weight
Composite video/left and right audio (2)
Input terminals
S-Video (2)
Component video/left and right audio (2)
HDMI (3)
VGA/audio (1)
FM antenna (1)
Antenna (1)
Headphone jack (1)
Output terminals
Audio output (1)
Digital output (1)
RS-232 (1)
Control terminals
Service Port (1)
50
FM radio presets
87.0~107.9 MHz
FM frequency range

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user's authority to operate this equipment.
32
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de
réception télévision ordinaire, Canada BETS-7 / NTMR-7
www.insigniaproducts.com

Advertisement

Table of Contents
loading

Table of Contents