CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases.
Important safety 15 The mains plug is the disconnecting device. The plug must remain readily operable. instructions 16 The apparatus with grounding-type plug is a class I apparatus. Class I apparatus need to be connected to earth ground wire to prevent possible electric shock.
Power source Note to CATV system installer Operate your TV only from the type of power source Article 820 of the National Electrical Code, indicated on the marking label. If you are not sure ANSI/NFPA No. 40 provides guidance for correct of the type of power supplied to your home, consult grounding.
TV using the four M4 screws provided with bracket. Congratulations on your purchase of a high-quality Adjusting the viewing angle Insignia product. Your NS-L19X-10A represents the state of the art in LCD TV design and is designed for To adjust the viewing angle: reliable and trouble-free performance.
2 Align the plastic studs on the new faceplate Side buttons with the holes on the front of your TV, then press firmly to install the new decorative faceplate. TV components Accessories # Button Description Make sure that the following accessories are provided in the packaging: Press to go to the next or previous channel in the CH /CH...
Back # Jack Description Service port for upgrading firmware. Do not use. SERVICE PORT Connect the 75 ohm coaxial cable from an FM antenna to this jack. Connect headphones to this jack. For more information, see “Connecting headphones” on page (headphone) Connect the video and audio output from an AV device AV2 IN VIDEO/S-VIDEO2...
Using the remote control # Button Description Press to confirm selections in an on-screen menu, or to ENTER open a submenu. Installing the remote control battery Press to navigate within the on-screen menus. For more information, see “Navigating the menus” on To install the remote control battery: page 14.
Programming a universal remote control to work with your TV To aim the remote control: You can operate your Insignia TV with a new or • Point the remote control toward the remote existing universal remote control. control sensor on the front of your TV.
Making connections Connecting a VCR To connect a VCR: 1 Make sure that your TV’s power cord is Cautions unplugged and the VCR is turned off. • Check the terminals for position and type before making any connections. Connect an AV cable to the AV VIDEO OUT jack •...
Connecting a camcorder or game 2 Connect an HDMI cable to the HDMI OUT jack on the HDMI device. Some game consoles have an HDMI connector, which can be used for a better picture. Device with HDMI To connect a camcorder or game: output 1 Make sure that your TV’s power cord is unplugged and the camcorder or game is...
3 Connect the other end of the component video To play video from a computer: cable to the COMPONENT1 IN jacks on the back 1 Turn on your TV, then press INPUT. The INPUT of your TV (you can also use the SOURCE menu opens.
Connecting a digital sound system Connecting an FM radio antenna To connect a digital sound system: To connect an FM radio antenna 1 Make sure that your TV’s power cord is • Connect the FM antenna (provided) to the FM unplugged and the digital sound system is antenna jack on the side of your TV.
3 Press to select the menu language you Selecting the video input source want, then press ENTER. The Choose your TV source screen opens. To select the video input source: 1 Turn on your TV, then press the INPUT key on the remote, or the INPUT button on the TV.
Audio menu (TV mode, equalizer on) Radio menu (FM mode) PICTURE AUDIO CHANNELS SETTINGS RADIO PICTURE AUDIO CHANNELS SETTINGS RADIO Radio Audio Equalizer Available Stations Equalizer Mode Custom Frequency 105.15 Equalizer Setting Fine Tune Balance Auto Search Digital Audio/SPDIF RA W Audio Only MTS/SAP Mono...
• To select a digital sub-channel, press the 2 Press to highlight Settings, then press number buttons to select the main digital or ENTER. The Settings menu opens. channel, then press the dot (.) button to select the sub-channel. Wait for the channel to change, or press ENTER to change the PICTURE AUDIO CHANNELS SETTINGS...
• Analog mode information—Displays channel • Advanced Video—Lets you adjust the Aspect number, channel label (if preset), signal type, Ratio, OverScan, Color Temperature, Backlight, audio information, and resolution. Noise Reduction and Advanced Contrast. See “Adjusting Advanced Video settings” on page 2 Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries,...
4 Press MENU to return to the previous menu, or • Phase—Adjusts the focus of stable images press EXIT to close the menu. • Reset Computer Settings—Resets computer settings to factory default. Adjusting the computer image 6 Press MENU to return to the previous menu, or press EXIT to close the menu.
Adjusting the sound • Equalizer Setting—(Available when the Equalizer is On) Select to make custom audio settings. Adjusting the sound To adjust the sound: 1 Press MENU. The on-screen menu opens. PICTURE AUDIO CHANNELS SETTINGS RADIO Picture Mode Standard • Treble—(Available when the Equalizer is Off ) Brightness Adjusts the high sounds.
Changing channel settings Playing TV audio only You can turn off the picture on your TV and listen to only the program audio. Automatically scanning for channels To play only the TV audio: To auto scan for channels: 1 Press MENU. The on-screen menu opens. 1 Press MENU.
If you selected Antenna or Cable, the TV 3 Press to highlight Add/Skip Channels, searches automatically for available channels in then press ENTER. The Channels - Add/Skip your area and stores the channel information in Channels menu opens. the channel list. This may take several minutes. While searching, the TV displays a progress report.
3 Press to highlight Favorites, then press 3 Press to highlight Channel Labels, then ENTER. The Channels - Favorites menu opens. press ENTER. The Channels - Channel Labels screen opens with the channel number field highlighted. PICTURE AUDIO CHANNELS SETTINGS RADIO Channels •...
3 Press to highlight Channel Strength, 4 Press the number buttons to enter the four-digit then press ENTER. The Channel Strength screen password. The default password is 0000. You opens showing the signal strength meter. should change the password to a number you can remember.
3 Press ENTER. The Enter Password screen opens. 4 Press the number buttons (0-9) to enter the four-digit password. The Settings - Parental 4 Press the number buttons (0-9) to enter the Controls submenu opens. four-digit password. The Settings - Parental Controls submenu opens.
4 Press the number buttons to enter the four-digit U. S. TV ratings (content-based) password. The Settings - Parental Controls All ratings. submenu opens. Fantasy violence. Strong language. PICTURE AUDIO CHANNELS SETTINGS RADIO Sexual situations. Settings • Parental Controls Button Lock Violence.
2 Press to highlight SETTINGS, then press 2 Press to highlight SETTINGS, then press or ENTER. The Settings menu opens with or ENTER. The SETTINGS menu opens. Parental Controls selected. PICTURE AUDIO CHANNELS SETTINGS RADIO Settings PICTURE AUDIO CHANNELS SETTINGS RADIO Settings Parental Controls...
3 Press to highlight Closed Caption, then 3 Press to highlight Closed Caption, then press ENTER. The Settings - Closed Caption menu press ENTER. The Settings - Closed Caption menu opens. opens. RADIO PICTURE AUDIO CHANNELS SETTINGS RADIO PICTURE AUDIO CHANNELS SETTINGS Settings •...
Adjusting time settings • Set the time by pressing to highlight Hour, then press to move the highlight to the hour, minute, or AM/PM field. Setting the date and time • Press to adjust the setting. 14 Press EXIT to close the menu. To set the date and time: Setting the sleep timer 1 Press MENU.
Adjusting menu settings Labeling an input source You can add a label to an input source to make it easier to identify. Selecting the menu language and transparency To label an input source: 1 Press MENU. The on-screen menu opens. To select the on-screen menu language and menu transparency: 1 Press MENU.
6 Press to highlight Custom, then press . Restoring default settings A custom label entry field opens. Caution When you restore default settings, all the settings you have customized (except the password and PICTURE AUDIO CHANNELS SETTINGS RADIO parental rating) are reset. Settings •...
Selecting an FM program 3 Press or ENTER to access. To select an FM program: • Press the number buttons (0-9) to select a PICTURE AUDIO CHANNELS SETTINGS RADIO preset station directly. Radio vailable Stations - OR - Frequency 105.15 Press CH+ or CH- to select a preset station.
Troubleshooting General Problem Solution Warning Cannot tune to one or • The program you want to watch may be blocked Do not try to repair your TV yourself. Contact more channels through the parental controls. For more authorized service personnel. information, see “Setting parental control levels”...
Specifications Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003. Standard Television Receiving Apparatus — Appareil de Design and specifications are subject to change without notice. réception télévision ordinaire, Canada BETS-7 / NTMR-7 Dimensions and weight are approximate. TV type 19-inch TFT LCD TV panel...
Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges.