Adjusting The Picture; Adjusting The Tv Picture; Adjusting Advanced Video Settings - Insignia NS-L19X-10A User Manual

• Analog mode information—Displays channel
number, channel label (if preset), signal type,
audio information, and resolution.
2 Press GUIDE to show the digital program guide,
which may show a list of available programs,
program times, and program summaries,
depending on the information provided by the
broadcaster.

Adjusting the picture

Adjusting the TV picture

To adjust the picture:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed, then press ENTER
or to access.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
MOVE OK
ENTER
Adjust settings to affect picture quality
Scroll down to additional settings
Picture
Contrast
Color
Tint
Sharpness
Advanced Video
Reset Picture Settings
MOVE OK
ENTER
Adjust the white level of the picture.
2 Press or to highlight an option, press
ENTER to access the option, then press
to adjust the option or press
setting. You can select:
• Mode—Selects the picture mode. You can
select Vivid (a bright and vivid picture),
Standard (a standard picture), Energy
Savings (the backlight brightness is
decreased), Theater (a finely detailed picture),
Sports (a dynamic picture), or Custom
(customized picture). You can also press
PICTURE on the remote control to select the
picture mode.
• Brightness—Adjusts the brightness.
• Contrast—Adjusts the contrast.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
16
PICTURE AUDIO CHANNELS SETTINGS RADIO
Standard
70
40
60
0
-16
SELECT PREVIOUS EXIT
MENU
EXIT
PICTURE AUDIO CHANNELS SETTINGS RADIO
40
60
0
-16
SELECT PREVIOUS EXIT
MENU
EXIT
or to select the
www.insigniaproducts.com
• Advanced Video—Lets you adjust the Aspect
Ratio, OverScan, Color Temperature, Backlight,
Noise Reduction and Advanced Contrast. See
"Adjusting Advanced Video settings" on page
16.
• Reset Picture Settings—Reset all picture
settings to factory default.
3 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting Advanced Video settings

To adjust the Advanced Video settings:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed, then press ENTER
or
2 Press
press ENTER. The Advanced Video submenu
opens.
Picture
Aspect Ratio
OverScan
Color Temperature
Backlight
Noise Reduction
Advanced Contrast
Adjust how the picture fills the screen
3 Press
ENTER to access the option, then press
to adjust the option or press
setting. You can select:
• Aspect Ratio - Selects the aspect ratio of the
picture. You can select Normal (selects the
correct aspect ratio to match the source
image), Wide (shows a full-screen picture),
Zoom (enlarges the picture but may crop the
top and bottom), Cinema (stretches the
picture at the edges, but maintains a good
aspect ratio at the center of the screen), or
Auto Zoom (selects the correct aspect ratio
automatically) if Auto Zoom in the Channels
menu is set to ON. When Auto Zoom in the
or
Channels menu is set to OFF, only Normal,
Wide, Zoom, or Cinema can be selected.
• Overscan—Turn this On to adjust the picture's
reproduction rate when receiving HDMI/DVI
signals in VIDEO format.
• Color Temperature—Selects the color
temperature. You can select Cool (to enhance
the blues), Normal, or Warm (to enhance the
reds).
• Backlight—Sets the overall brilliance of the
screen.
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High, or
Off.
• Advanced Contrast—Select Adaptive
Contrast to automatically adjust the picture
detail and brightness, or Dynamic Contrast
Ratio to enhance the contrast ratio between
light and dark areas of the picture.
to access.
or to highlight Advanced Video, then
PICTURE AUDIO CHANNELS SETTINGS RADIO
• Advanced Video
OK
MOVE SELECT PREVIOUS
MENU
ENTER
or to highlight an option, press
Normal
Off
Cool
30
Low
EXIT
EXIT
or
or to select the