Using The Remote Control; Installing The Remote Control Battery - Insignia NS-L19X-10A User Manual

# Button Description
Press to confirm selections in an on-screen menu, or to
7 ENTER
open a submenu.
Press to navigate within the on-screen menus. For
8
more information, see "Navigating the menus" on
page 14.
Press to open the on-screen menus. For more
9 MENU
information, see "Navigating the menus" on page 14.
Press to set the sleep timer. For more information, see
10 SLEEP
"Setting the sleep timer" on page 27.
Press to select the audio mode. For analog channels,
you can select STEREO, SAP (secondary audio
program), or MONO.
11 MTS/SAP
For digital channels, you can select the audio track (if
more than one track is available). For more
information, see "Selecting the audio mode" on
page 18.
Press to switch to FM radio mode. For more
12
FM
information, see "Switching to FM mode" on page 29.
Press to display the information banner.
13
INFO
Press to select TV mode.
14 TV
Press to select an video input source. Press once for
15 VIDEO AV1. Press twice for AV2. Press three times for
S-VIDEO1. Press four times for S-VIDEO2.
Press to turn off the sound. Press again to restore the
16 MUTE
sound.
Press to display program guide information (if
17
GUIDE
available) for DTV broadcasts.
Press to enter a program number for a digital
18
sub-channel. For more information, see "Digital
(dot)
sub-channels" on page 15.
Press to return to the last channel viewed.
19 RECALL
Press to display your favorite channel list. For more
20 FAVORITE information, see "Setting up a favorite channel list" on
page 20.
Press to display the input source menu. For more
21 INPUT information, see "Selecting the video input source" on
page 13.
Press to turn on closed captioning. For more
22
CCD information, see "Turning closed captioning on or off"
on page 25.
Press to exit the on-screen menu.
23 EXIT
Press to select the picture mode. For more
24 PICTURE information, see "Adjusting the TV picture" on
page 16.
Press to select the audio mode. For more information,
25 AUDIO
see "Selecting the audio mode" on page 18.

Using the remote control

Installing the remote control battery

To install the remote control battery:
1 Remove the battery holder from the bottom of
2 Insert a lithium battery into the battery holder.
3 Reinsert the battery holder into the bottom of
www.insigniaproducts.com
the remote control.
Make sure that (+) symbol on the battery facing
up.
the remote control.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the battery
leaks, clean the battery holder with a cloth. If
chemicals touch your skin, wash immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Remove the battery when the charge is
depleted.
• If the remote control is not going to be used for
an extended period of time, remove the battery.
7