Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for A-Neu Video HD-88LA
Summary of Contents for A-Neu Video HD-88LA
- Page 1 HD-88LA 8x8 HDMI Matrix Switcher INSTRUCTION MANUAL A-NeuVideo.com | Frisco, Texas 75034 (317) 456-2461 V.1.4...
-
Page 2: Safety Information
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fi re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit. -
Page 3: Table Of Contents
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. The HD-88LA is high-performance 8x8 matrix routing switcher • To protect the unit from overheating, do not block any vents or for HDMI signals. -
Page 4: Features
FEATURES FEATURES 1. 8x HDMI digital source devices matrix switched to 8x HDMI devices. 2. HDMI digital video w/embedded audio, DVI format and CEC/HDCP 2.0 compliant 3. Seven (7) function key control and worldwide (8) EDID modes for HDTV resolutions. 4. -
Page 5: Specifi Cations
SPECIFICATIONS SPECIFICATIONS Type of HDMI Switcher: 8x HDMI inputs To 8x HDMI Outputs Matrix Switcher HDMI Support: HD 1080p-@60Hz, H36-bit Deep color, 3D (1.4a) formats HDCP / CEC Support: HDCP 2.0 Compliant, CEC Compliant. Video Bandwidth: Double Data Rates: 340Mhz, Total 6.75Gbps bandwidth Digital Video Support: Full HD resolution : 480i / 480p / 720p / 1080i / 1080p Digital Audio Support: Multi Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH) -
Page 6: Front Panel
FRONT PANEL FRONT PANEL POWER SWITCH The power switch turns the unit on and off. The LCM will illuminate red to indicate that the switcher is ON and is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last confi... - Page 7 FRONT PANEL FRONT PANEL FUNCTION KEY - ALL Disables (mute) video on all destinations OR Selects the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show “ 0 “ indicating all destinations have no video selected. Option 2 - Press ALL followed by Source 1 thru 8.
- Page 8 FRONT PANEL FRONT PANEL FUNCTION KEY - MEMORY The system will show store presets, up to a total of 16. Presets are stored in local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location. - Confi...
-
Page 9: Rear Panel
REAR PANEL REAR PANEL DC POWER INLET The Switcher is fi tted with a DC power plug input connector. Power Jack: ᴓ Ensure that the used is of an approved type and is of suffi cient DC Jack - Inner OD 2.1mm (+ ) ᴓ... -
Page 10: Typical Application
TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using IR Transmitters (HDBaseT) and IR Receiver (HDBaseT) to control a projector NOTE: 1. IR Control Projector Over HDBaseT Extender: Use HDBaseT Transmitter Use HDBaseT Receiver 2. Audio Input : Support DVI Audio input. 3. - Page 11 TYPICAL APPLICATION INSTALLING DIAGRAM Sample connection using DVI & Audio input and link to the AUDIO Amplifi er via SPDIF digital signal output. NOTE : 1. Use DVI and Audio Input via DVI Player Device. 2. HDMI display support DVI input via HDMI HDTV Support DVI input 3.
-
Page 12: Remote Control
REMOTE CONTROL Before making any connections to the switcher. Observe the following: > Ensure the mains voltage supply matches the label on the > Connect all audio video sources and destination equipment supplied plug-pack (+/- 10%) > Power up all source and destination audio-visual sources >... - Page 13 REMOTE CONTROL IR REMOTE CUSTOM AND DATA CODES (NEC STANDARD) HOW TO SETUP IR CODES : Model number : HD-88LA CUSTOM CODE : 38C7 POWER ON : 38C7 A15E POWER OFF : 38C7 A25D ALL : 38C7 B04F OFF :...
-
Page 14: Ir Extender
IR EXTENDER REAR PANEL IR EXTENDER PORT HD-100 (HD-100) HD-100 HD-100 HD-100C (HD-100C) HD-100C HD-100C Note: When you plug the External IR extender into the switcher, the front panel IR receiver remains active. IR EXTENDER PACKAGE : HOW TO SETUP THE IR EXTENDER RECEIVER COMPONENTS HD-100 HD-100 HD-100... -
Page 15: Edid Function
EDID FUNCTION EDID FUNCTION SETUP EDID setup To change the EDID setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will fl ash blue and the display will show the current Embedded EDID Status. - Page 16 EDID FUNCTION NOTE : The already learned EDID cannot be modifi ed. You can only rebuild a new Learning EDID. For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the EDID data cannot change.
- Page 17 EDID FUNCTION EDID FUNCTION : LEARNING Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. The button will fl ash blue and the display will show the current Embedded EDID Press the EDID button Step 1. Status.
- Page 18 EDID FUNCTION Auto mode defi nition Common Resolution and Audio Switcher will fi nd highest common Resolution and Audio from all destination EDID to link Source. Example for single source Destination > press #1 and then Source > press #1 Destination device #1 will set to the highest common resolution and Audio of source #1 Example for multiple sources Destination device #1, #2, #3 will be set to the highest common resolution and Audio available and source device #1 will output...
-
Page 19: Ethernet Serial Interface
ETHERNET SERIAL INTERFACE ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual. ETHERNET SERIAL INTERFACE Pin Ethernet Reference TXOP TX + TXON TX - RXIP RX +... -
Page 20: Rs-232 Serial Interface
RS-232 SERIAL INTERFACE RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual. RS-232 SERIAL INTERFACE RS-232 Defi nition -------- Not used Transmitter Receiver -------- Not used... - Page 21 TERMS AND CONDITIONS OF USE PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER A-NEUVIDEO, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions.