Table of Contents
Advertisement
Quick Links
A-NeuVideo.com
Frisco, Texas 75034
(469) 277-7606
HD-44G
4x4 HDMI MATRIX SWITCHER
IMPORTANT WARRANTY INFORMATION.
If you remove the HDMI screw posts, you must use the provided HDMI Locking Post replacement
screws to keep the internal HDMI jack secure. Removing the HDMI screws without installing the
HDMI Locking Post replacement screws will void your warranty.
AUDIO / VIDEO MANUFACTURER
Advertisement
Table of Contents
Related Manuals for A-Neu Video HD-44G
Summary of Contents for A-Neu Video HD-44G
- Page 1 HD-44G 4x4 HDMI MATRIX SWITCHER IMPORTANT WARRANTY INFORMATION. If you remove the HDMI screw posts, you must use the provided HDMI Locking Post replacement screws to keep the internal HDMI jack secure. Removing the HDMI screws without installing the HDMI Locking Post replacement screws will void your warranty.
-
Page 2: Safety Information
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit. -
Page 3: Table Of Contents
The HD-44G is professional 4x4 matrix routing switch. Supporting • Do not attach the power supply cabling to building surfaces. (4) HDMI Inputs and (4) HDMI Outputs. The HD-44G is based • Use only the supplied power supply unit (PSU). Do not use the on HDMI standards and supports full resolution HDMI video with PSU if it is damaged. -
Page 4: Features & Specifications
NEUVIDEO FEATURES & SPECIFICATIONS FEATURES • (4) HDMI digital source devices matrix switched to (4) HDMI devices • HDMI digital video w/ embedded audio, DVI format and CEC/HDCP 1.2 compliant • (7) function key control and worldwide EDID modes for HDTV resolutions •... -
Page 5: Front Panel
NEUVIDEO FRONT PANEL FRONT PANEL POWER SWITCH: The power switch turns the unit ON and OFF. The LCM will illuminate red to indicate that the switcher is ON and is receiving power. The switcher will remember the last state during a power cycle. When power is removed and resorted, the last configuration will be evoked. - Page 6 NEUVIDEO FRONT PANEL FRONT PANEL FUNCTION KEY - OFF: Disables (mutes) video to selected channels for either destination. - Press OFF button followed by any Destination channel. - Press output destination 1 THRU 4. The display will show ”0“ for the selected channel indicating no video is selected.
- Page 7 NEUVIDEO FRONT PANEL FRONT PANEL FUNCTION KEY - MEMORY: The system will show stored presets, up to a total of (8). Presets are stored in local memory using Source keys 1 thru 4 or Destination keys 1 thru 4 as the memory preset location. - Configure desired matrices.
-
Page 8: Back Panel
NEUVIDEO BACK PANEL BACK PANEL DC POWER INLET: The switcher is fitted with a DC power plug POWER JACK: input connector. Ensure that the plug used is of an approved type and is DC Jack - Inner OD Ø 2.1mm (+) of sufficient current carrying connector capacity with the correct voltage Outside OD Ø... -
Page 9: Remote Control
NEUVIDEO REMOTE CONTROL Before making any connections to the switcher. Observe the following: • Ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%). • Ensure that the power switch is OFF. • Ensure that all system grounds (earth) are connected to a common point. •... - Page 10 NEUVIDEO REMOTE CONTROL IR REMOTE CUSTOM AND DATA CODES (NEC Standard) HOW TO SETUP IR CODES: Model Number: HD-44G CUSTOM CODE: 837C POWER ON: 837C A15E POWER OFF: 837C A25D ALL: 837C B04F OFF: 837C B14E EDID: 837C B748 LOCK:...
-
Page 11: Edid Function
NEUVIDEO EDID FUNCTION EDID function Setup EDID SETUP TO CHANGE THE EDID SETUP Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will flash blue and the display will show the current Embedded EDID Status. To set EDID mode. - Page 12 NEUVIDEO EDID FUNCTION EDID FUNCTION: (7) EMBEDDED EDID MODES Mode 1. FSS (Fast Speed Start) Fast Speed Start mode shortens the startup time of the switcher. Selecting this ® ® mode does not force the EDID setup to be cancelled. Users may first select one EDID mode from mode 2 to 3, and then select mode 1 for fast speed start ®...
- Page 13 NEUVIDEO EDID FUNCTION EDID Function: LEARNING LEARNING EDID SINGLE TO SINGLE EXAMPLE: LEARN DESTINATION #4 EDID TO SOURCE #2. Step 1. Press the EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2.
-
Page 14: Rs-232 Serial Interface
RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 ) The HD-44G switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control system. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When... -
Page 15: Ir Extender
NEUVIDEO IR EXTENDER 1. HD-100 IR 300M Receiver Switcher IR EXT. In Cable (3C) IR Receiver (HD-100) Distance: Max.300M IR PN#: SW-HDXX R oHS /95/E C INP UT R S -232 IR E XT. in DC 12V IR Rx RS - 232 IR EXT . -
Page 16: Typical Application
NEUVIDEO TYPICAL APPLICATION INSTALLING DIAGRAM Sample Connection: Using RS-232 serial interface or IR external in to control switch (HD-44G). NOTE: 1. Controls a projector with a CAT5e/6/7 extender: HD-6335T: HDBaseT HDMI CAT5e/6/7 Transmitter ™ HD-6335R: HDBaseT HDMI CAT5e/6/7 Receiver ™... - Page 17 NEUVIDEO TYPICAL APPLICATION INSTALLING DIAGRAM Sample Connection: Using an audio extractor and ARC control box with linked TV return audio to an audio device, controlling a satellite receiver source via HDBaseT transmitter (HD-6335T) and HDBaseT receiver (HD-6335R). ™ ™ NOTE: 1.
- Page 18 THIS PAGE IS INTENTIONALLY LEFT BLANK.
- Page 19 THIS PAGE IS INTENTIONALLY LEFT BLANK.
-
Page 20: Warranty
NEUVIDEO TERMS & CONDITIONS OF USE PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions.