Related Manuals for A-Neu Video HD-88K
Summary of Contents for A-Neu Video HD-88K
- Page 1 HD-88K 8x8 UHD 4K2K HDMI MATRIX SWITCH A-NeuVideo.com Frisco, Texas 75034 (317) 456-2461 V1.1 AUDIO / VIDEO MANUFACTURER...
-
Page 2: Safety Information
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit. -
Page 3: Table Of Contents
This will make the installation easier. is believed to be accurate. We assume no responsibility for any • HD-88K Matrix Switcher infringements of patents or other rights of third parties which may result from its use. -
Page 4: Introduction & Features
INTRODUCTION The HD-88K is a professional 8x8 matrix routing switch. Supporting (8) HDMI Inputs and (8) HDMI Outputs. The HD-88K is based on HDMI standards and supports full resolution HDMI video with embedded HDCP and a signal bandwidth of 340Mhz, so there is no signal degradation. -
Page 5: Specifications
NEUVIDEO SPECIFICATIONS Specifications • Type of Switcher: (8) Inputs to (8) Outputs HDMI Matrix Switch • HDMI Support: HDMI 4K2K, 1080p@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats • HDCP / CEC Support: HDCP 1.3 Compliant, CEC Compliant • Video Bandwidth: Double Data Rates: 340Mhz, Total 6.75Gbps bandwidth • Digital Video Support: HD: 480i/480p/720p/1080i/p and 4K2K up to 36bit deep color • Video Inputs: 8x HDMI (HDMI or DVI digital source) • Video Outputs: 8x HDMI with Booster output 1080p up to ~98 feet (30M) &... -
Page 6: Front Panel
NEUVIDEO FRONT PANEL FRONT PANEL POWER SWITCH: The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration will be evoked. - Page 7 NEUVIDEO FRONT PANEL FRONT PANEL - EDID, MEMORY & RECALL FUNCTION KEY - EDID: Used to display change current EDID mode. - Press EDID to select new EDID mode or select - Press SOURCE row #1 or #2 Select EDID modes. - Press ENTER to ready memory location.
- Page 8 NEUVIDEO FRONT PANEL FRONT PANEL - ALL, OFF, LOCK & ENTER FUNCTION KEY - ALL: Disables (mutes) video on all destinations OR Selects the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show “ 0 “ indicating all destinations have no video selected.
-
Page 9: Rear Panel
NEUVIDEO REAR PANEL REAR PANEL DC POWER INLET: The switcher is fitted with a DC power plug POWER JACK: input connector. Ensure that the plug used is of an approved type DC Jack - Inner OD Ø 2.1mm (+) and is of sufficient current carrying connector capacity with the Outside OD Ø... -
Page 10: Typical Application
TYPICAL APPLICATION INSTALLING DIAGRAM Samples Connection: Using external IR, RS-232 or Ethernet commands to control the HD-88K via PC or HD-100 IR receiver transmit the HD-88K’s IR signal. NOTE: 1. Switcher IR External port : Use HD-100 IR signal Receiver. -
Page 11: Remote Control
NEUVIDEO REMOTE CONTROL Before making any connections to the switcher. Observe the following: • Ensure the mains voltage supply matches the label on the supplied plug-pack (+/- 10%) • Ensure that the power switch is OFF • Ensure that all system grounds (earth) are connected to a common point. •... - Page 12 NEUVIDEO REMOTE CONTROL IR REMOTE CUSTOM AND DATA CODES (NEC Standard) HOW TO SETUP IR CODES : Model number : HD-88K CUSTOM CODE : 8A75 ALL: 8A75 B04F POWER ON: 8A75 A15E OFF: 8A75 B14E POWER OFF: 8A75 A25D EDID:...
-
Page 13: Edid Function
NEUVIDEO EDID FUNCTION EDID function for HDMI Matrix Switcher EDID setup To change the EDID setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will flash blue and the display will show the current Embedded EDID Status. - Page 14 NEUVIDEO EDID FUNCTION EDID function : 7x Embedded EDID Modes Mode 1. FSS ® (Fast Speed Start) Fast Speed Start ® mode shortens the startup time of the switcher. Selecting this mode does not force the EDID setup to be cancelled. Users may first select one EDID mode from mode 2 to 3, and then select mode 1 for fast speed start.
- Page 15 NEUVIDEO EDID FUNCTION EDID LEARNING MODE Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5. Step 1. Press the EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2.
- Page 16 NEUVIDEO EDID FUNCTION EDID SINGLE LEARNING MODE LEARNING EDID MODE-#1 Learning EDID from Destination to Source Press EDID > DESTINATION > SOURCE > ENTER Single Learning Mode#1 EDID setup Key Press Sequence: 1. Press EDID button EDID > DESTINATION # > SOURCE # >...
- Page 17 NEUVIDEO EDID FUNCTION EDID SINGLE LEARNING MODE 2 LEARNING EDID #2 Passing EDID from Destination to Source 1. Press EDID button Multiple Learning mode #2 EDID setup Key Press Sequence: EDID > OFF > DESTINATION #1 thru #8 > ENTER The LCM will show the current EDID status.
-
Page 18: Ir Extender
NEUVIDEO IR EXTENDER REAR PANEL IR EXTENDER PORT 1. HD-100 IR 300M Receiver Switcher IR EXT. In Cable (3C) IR Receiver (HD-100) Distance: Max.300M IR PN#: SW-HDXX R oHS /95/E C INP UT R S -232 IR E XT. in DC 12V IR Rx RS - 232... -
Page 19: Rs-232 & Ethernet Serial Interface
RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 ) The HD-88K switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control system. The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When... - Page 20 NEUVIDEO TERMS AND CONDITIONS OF USE PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions.