Marantz CD5001 User Manual page 22

ADVANCED OPERATIONS
Program play in the text display mode
In the case of a CD-TEXT disc, tracks can be selected by title
for program play.
If the main display is set to the time display mode, press the
TEXT button on the remote control unit to establish the text
display mode.
AMS
SCROLL/
TEXT
RECALL
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1.
During stop, press the PROGRAM button on the remote
control unit.
7
PROGRAM
"Program" appears for an instant on the main display. Then
the PROG indicator flashes, and the program mode is
established.
Flashes
5
PROG
TEXT
2. Press the 4 and ¢ buttons on the remote control unit
or 4/1 and ¡/¢ buttons on the player to select
the track. (The track can also be selected using the
numeric buttons on the remote control unit but in this case
the title is not displayed).
18
A-B REPEAT
TIME
8 9
CANCEL
0
The title of each selected track is scrolled, and once it
has been scrolled, it is programmed automatically. If you
do not want to program the track, select another track
before the scrolling is completed.
TEXT 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
3.
Repeat step 2 to program the desired tracks in sequence.
Up to 30 tracks can be programmed.
4. Once all the tracks have been programmed, press the 7
button on the player or remote control unit or press the
PROGRAM button on the remote control unit.
The PROG indicator stops flashing and lights up instead,
and the program is entered.
Light up
TTL PROG
TEXT 2 4 6 8
5.
Press the 3 button on the player or remote control unit.
Play of the selected tracks now starts in the programmed
sequence.
Program play will start even when step 4 is omitted.
Note:
Programming in the text display mode cannot be
performed for tracks which have no text information for
their titles.
PROGRAM CANCEL
0
RANDOM QUICK REPLAY
TTL TIME
10