Connections - Marantz CD5001 User Manual

4. CONNECTIONS

This CD player is connected to an amplifier, CD recorder and
other components for use. To ensure that the components
are connected properly, refer to the instruction manuals that
come with the components to be connected.
Before connecting the components, be absolutely sure to turn
off their power.
Connecting to an amplifier
Use the audio connecting cord to connect the player with a
stereo amplifier or AV amplifier. Do not connect the player to
the PHONO input connectors on the amplifier.
When making the connections, insert the plugs securely into
the connectors. Failure to insert the plugs securely may result
in noise.
Audio connecting cord (supplied)
(Red) (White)
Amplifier
Connecting to a digital audio component
The player has one digital optical output connector and one
digital coaxial output connector.
You can enjoy digital recording when the player is connected
to a CD recorder or other digital recording component.
(Red) (White)
:
Signal flow
• Connecting the optical output connector
Use an optical digital connecting cable available on the
market. Insert the plug firmly in until it clicks into place. Do
not bend or bundle the optical digital connecting cable.
Optical digital connecting cable
(available on market)
REMOTE
DIGITAL IN/OUT
CONTROL
COAXIAL OPTICAL
IN
OUT
EXTERNAL
INPUT OUTPUT INPUT OUTPUT
CD recorder, MD deck, AV amplifier, etc.
• Connecting the coaxial output connector
Use a coaxial digital connecting cable available on the market.
Coaxial digital connecting cable
(available on market)
DIGITAL IN/OUT
ALOG IN/OUT
COAXIAL OPTICAL
L
R
OUTPUT
INPUT OUTPUT
INPUT OUTPUT
CD recorder, MD deck, AV amplifier, etc.
:
Signal flow
INTERNAL
:
Signal flow
REMOTE
CONTROL
IN
OUT
EXTERNAL INTERNAL
7