Reversing The Door - Midea MTM258W User Manual

REVERSING THE DOOR

Please ensure the refrigerator is unplugged from the main power source and
any items are removed from inside the refrigerator and door bins before
reversing the door.
WARNING
Follow below steps to reverse the door from the supplied position.
1. R emove the cover from the door hinge and remove the
three screws holding the hinge bracket.
2. Lift the freezer door from the hinge. Place the door in a
safe location to avoid scratches or damage.
Remove the two (2) screws holding the middle hinge.
3.
Support the refrigerator door as you remove the hinge.
4.
Remove the three (3) caps from the left side and place
them in the screw holes and top of door from Step 3.
Swap the cap and screw from the left to right side next to
the caps (*). Remove the cap from the top left side of the
refrigerator.
Carefully lift the door from the hinge and place it in a safe
5.
location to avoid scratches or damage.
Remove the two (2) screws holding the bottom hinge.
6.
Remove the two (2) caps from the opposite side and
7.
place them in the screw holes from Step 6.
6
step 1b
step 1a
step 3
step 4a
step 4b
(*)
step 6
step 7a step 7b