Security - Asus P4P800-F User Manual

Boot to OS/2 [No]
This field sets compatibility mode to OS/2 operating system. Configuration options:
[No] [Yes]
Wait for 'F1' If Error [Enabled]
This field sets whether to wait for F1 key to be pressed if an error occurs.
Configuration options: [Disabled] [Enabled]
Hit 'Del' Message Display [Disabled]
This field toggles the display of "Press DEL to run Setup". Configuration options:
[Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When [Enabled], it allows option ROMs to trap Interrupt 19. This is required by
some PCI cards that provide a ROM based setup utility. Configuration options:
[Disabled] [Enabled]

2.6.2 Security

Change Supervisor Password
These fields allow you to set passwords. To set a password, highlight the
appropriate field and press <Enter>. A pop-up window will appear; Type in a
password then press <Enter>. You can type up to eight alphanumeric characters.
Symbols and other characters are ignored. To confirm the password, type the
password again and press <Enter>. The password is now set. This password
allows full access to the BIOS Setup menus. To clear the password, highlight this
field and press <Enter>. The same dialog box as above appears. Press <Enter>.
The password is cleared.
2-20 Chapter 2: BIOS information