Asus P4P800-F User Manual page 37

12. Infrared Module connector (10-1 pin IR_CON1)
These connectors support an optional wireless transmitting and receiving
infrared module. The module mounts to a small opening on the system chassis
that support this feature.
Use the ten pins as shown in Back View and connect a ribbon cable from the
module to the motherboard SIR connector according to the pin definitions.
P4P800-F
P4P800-F Infrared Module Connector
The IR module is not included in this motherboard package.
13. Optional serial port connector (10-1 pin COM2)
This connector accommodates a second serial port using an optional serial
port bracket. Connect the bracket cable to this connector then install the
bracket into a slot opening at the back of the system chassis.
P4P800-F
P4P800-F Serial COM2 Bracket
The COM2 module is not included in this motherboard package.
1-26
®
COM2
PIN 1
®
Chapter 1: Product introduction
Standard Infrared (SIR)
Front View Back View
SIR
CIR
IRTX
GND
+5V
(NC)
IRRX