Download  Print this page

Getting Started; Wired Connection; Wireless Connection; Setting Ip Address For Wired Or Wireless Connection - Asus WL-520GC User Manual

Asustek broad range wireless family router user manual.
Hide thumbs


3. Getting Started

The ASUS WL-520GU/GC Wireless Router can meet various working scenarios with proper
configuration. The default settings of the wireless router may need change so as to meet your
individual needs. Therefore, before using the ASUS Wireless Router, check the basic settings to
make sure they all work in your environment.
ASUS provides a utility named EZSetup for fast wireless configuration. If you would like to use
EZSetup for your wireless network configuration, refer to chapter 6 for details.
Note: Wired connection for initial configuration is recommended to avoid possible
setup problems due to wireless uncertainty.

1) Wired Connection

The ASUS WL-520GU/GC Wireless Router is supplied with an Ethernet cable in the package.
Since the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use
either straight-through or crossover cable for wired connection. Plug one end of the cable to the
LAN port on the rear panel of the router and the other end to the Ethernet port on your PC.

2) Wireless Connection

For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer
to your wireless adapter user manual for wireless connection procedures. By default, the
SSID of ASUS Wireless Router is "default" (in lower case), encryption is disabled and open
system authentication is used.

3) Setting IP Address for Wired or Wireless Connection

To access WL-520GU/GC Wireless Router, you must have correct TCP/IP settings on your wired
or wireless clients. Set the IP addresses of the clients within the same subnet of WL-520GU/GC.
Getting IP address Automatically
The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your
PC get IP address automatically from the ASUS Wirelesss Router.
Note: Before rebooting your PC, switch ON the
wireless router and make sure the router is in ready
Setting up IP address Manually
To set IP address manually, you need to know the default
settings of the ASUS Wireless Router:
• IP address
• Subnet Mask
WL-520GU/GC Broad Range Wireless Family Router User Manual


Table of Contents

   Also See for Asus WL-520GC

   Related Manuals for Asus WL-520GC

This manual is also suitable for:

Wl-520gu - wireless router

Comments to this Manuals

Symbols: 0
Latest comments: