Before using for the first time
2. Language settings display
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the Settings menu.
Sprache
deutsch
)
^ The required language can be
selected by pressing the ~ button.
Confirm with OK.
3. Reminder to remove transport
struts
To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
:
Remove transport
^ After removing the transport struts (if
this has not already been done by
your fitter), press the OK button.
^ Remove the display fascia.
16
OK
bars
OK
4. Running your first programme
Your machine is now ready for the first
programme to be run.
Select
programme
^ Turn the programme selector to
Cottons 60°C.
Duration:
2:09 h
Start flashes green.
^ Press the Start button.
The washing machine will now run a
complete wash programme.
Anti-crease
Finished
^ Turn the programme selector to
Finish.
^ Switch off the washing machine.
The machine is now ready for use.