Front-Wheel Stand - BMW F 800 GS Rider's Manual

Adjust chain sag (

Front-wheel stand

Install the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without
also accompanying use of
auxiliary stand.
Risk of damage to parts if vehicle
topples.
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place the motorcycle on a suit-
able auxiliary stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
116). Use basic stand with tool num-
ber (83 30 0 402 241) in com-
bination with front-wheel ad-
apter (83 30 0 402 242).
Loosen the fastening screws 1.
Push the two adapters 2 apart
until the front forks fit between
them. Adjust the adapter studs
to suit the front suspension.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten securing screws 1.
8
127
z