BMW F 800 GS Rider's Manual page 124

8
122
Install axle screw 2 and tighten
to the specified tightening
torque.
Axle screw in quick-re-
z
lease axle, front
30 Nm
Tighten left axle clamping
screws 3 to the specified
tightening torque.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
If fully tightened beforehand,
slacken right axle clamping
screws 1 again.
Remove the front-wheel stand.
without centre stand OE
Remove the auxiliary stand.
Ease the right brake caliper
onto the brake disc.