The ASC function is deactiv-
ated.
Activating the ASC
function
Press and hold down button 1
until the ASC telltale and warn-
ing light changes status.
ASC telltale and warn-
ing light goes out; if self-
diagnosis has not completed it
starts flashing.
Release button 1 within two
seconds.
ASC telltale and warning
light remains off or contin-
ues to flash.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
NOTICE
An ASC fault has occurred if the
ASC telltale and warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Riding mode
Riding mode
with off-road mode ABS and
OE
ASC
BMW Motorrad has developed
two operational scenarios for
your motorcycle from which you
can select the scenario suitable
for your situation:
ROAD: On-road riding
ENDURO: Off-road mode
In both the ABS and ASC sys-
tems, the level of wheel slip is
optimised for each riding surface.
NOTICE
Detailed information regarding
the off-road mode can be found
in the section entitled "Engineer-
ing details".
Adjust off-road mode
with off-road mode ABS and
OE
ASC
Prerequisite: On-road riding is
active.
4
55
z