Centrally Controlled; Troubleshooting; Specifications - Mitsubishi Electric PAR-FL31MA Instruction Manual

7. Centrally Controlled

1. In cases where local operation by wireless remote controller is prohibited.
™ When remote operation is prohibited due to centralized control, the prohibited operations cannot
be performed using a wireless remote controller.
• There are 3 types of remote operation that are prohibited, starting and stopping, operating
mode and temperature setting.
• Operations other than the prohibited items are enabled.
2. In cases where wireless remote controller are operated during Centrally Controlled.
™ Signal Receiving Unit will respond as follows.
• Unit will beep twice.
• ON/OFF lamp will flash three times at 0.25 second intervals if the unit is ON or two times if it
is OFF.
Note:
In this case the operation of the air-conditioner and the display of the remote control may differ.

8. Troubleshooting

<When the operation lamp of the Signal Receiving Unit is blinking>
This means that an abnormality has occurred with the air conditioner. In this case, turn the power off and
consult your dealer. Do not try to repair by yourself.

9. Specifications

Item
Power supply voltage
Operating environment
Weight
Dimensions
Installation
Time display
Time setting
Display method
Clock accuracy
Specification
3 VDC (two size-AAA alkaline batteries)
Temp. 0 to 40 °C, Humidity 30 to 90 % RH (No condensation allowed)
0.09 kg (without batteries)
153 (H) × 57 (W) × 21 (D)
Wall installation using remote controller holder
12-hour time display (Current time, Stop timer time, Start timer time)
Times can be set in steps of 10 minutes.
Digital LCD
±50 seconds per month (at 25 °C)
15