Primary And Secondary Ide Master/Slave - Asus Terminator 2 Barebone System T2-R User Manual

5.3.4 Primary and Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a
device item then press <Enter> to display the IDE device information.
Primary IDE Master
Device : Hard Disk
Vendor : Maxtor 6Y080L0
Size : 81.9GB
LBA Mode : Supported
Block Mode : 16 Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-6
SMART Monitoring: Supported
Type
LBA/Large Mode
Block (Multi-sector Transfer)
PIO Mode
Smart Monitoring
32Bit Data Transfer
The BIOS automatically detects the values opposite the dimmed items
(Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA,
Ultra DMA, and SMART monitoring). These values are not user-
configurable. These items show N/A if no IDE device is installed in the
system.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic
selection of the appropriate IDE device type. Select CDROM if you
are specifically configuring a CD-ROM drive. Select ARMD (ATAPI
Removable Media Device) if your device is either a ZIP, LS-120, or
MO drive. Configuration options: [Not Installed] [Auto] [CDROM]
[ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA
mode if the device supports this mode, and if the device was not
previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto,
the data transfer from and to the device occurs multiple sectors at a
time if the device supports multi-sector transfer feature. When set to
Disabled, the data transfer from and to the device occurs one sector
at a time. Configuration options: [Disabled] [Auto]
ASUS Terminator 2 barebone system
Select the type of
device connected to the
system.
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
95