Asus Terminator 2 Barebone System T2-R User Manual page 77

7. Floppy disk drive connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable.
Connect one end of the cable to the motherboard, then connect the
other end to the floppy disk drive. (Pin 5 is removed to prevent
incorrect insertion when using ribbon cables with pin 5 plug).
P4R8T
®
P4R8T Floppy Disk Drive Connector
8. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)
These connectors are for the 20-pin and 4-pin power plugs from the
power supply unit. The plugs from the power supply unit are designed
to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors fit completely.
See page 39 for details on the power supply unit.
® P4R8T
P4R8T ATX Power Connector
ASUS Terminator 2 barebone system
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
ATXPWR
+12.0Volts
+5V Standby
Power Good
Ground
+5.0 Volts
Ground
+5.0 Volts
Ground
+3.3 Volts
+3.3 Volts
ATX12V
+12V DC COM
+12V DC COM
PIN 1
+5.0 Volts
+5.0 Volts
-5.0 Volts
Ground
Ground
Ground
Power Supply On
Ground
-12.0Volts
+3.3Volts
77