Primary/Secondary Ide Master/Slave - Asus Vintage User Manual

5.3.4 Primary/Secondary IDE Master/Slave

While entering Setup, BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a
device item then press <Enter> to display the IDE device information.
Primary IDE Master
Device : Hard Disk
Vendor : ST320410A
Size : 20.0GB
LBA Mode : Supported
Block Mode : 16 Sectors
PIO Mode : 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-5
SMART Monitoring: Supported
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
SMART Monitoring
32Bit Data Transfer
The BIOS automatically detects the values opposite the dimmed items
(Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA,
Ultra DMA, and SMART monitoring). These values are not
user-configurable. These items show N/A if no IDE device is installed in
the system.
Type [Auto]
Selects the type of IDE drive.
Configuration options: [Auto] [Not Installed] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Auto] [Disabled]
Block (Multi-Sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the
data transfer from and to the device occurs multiple sectors at a time if the
device supports multi-sector transfer feature. When set to Disabled, the
data transfer from and to the device occurs one sector at a time.
Configuration options: [Auto] [Disabled]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
ASUS Vintage-S800 barebone system
[Auto]
[Auto]
M [Auto]
[Auto]
[Auto]
[Disabled]
Select the type of
device connected to the
system.
67