Jøtul F481 Installation And Operating Instruction page 7

4.2 Installation
External air supply through the base
Through the fl oor
1. NB! If connecting the Flex Hose through a hole in the fl oor,
do not knock out the removable cover plates (Fig. 5 A).
Through the rear outlet in the base
Fig. 4
2. If connecting a fl ex hose through the rear outlet of the
base, the shelf (A) and the internal back plate (B) must be
removed fi rst.
Fig. 5
3. If connecting a fl ex hose (Ø 80 mm) for external air supply
to the external air connector beneath the burn chamber,
the removable cover plates (A) must be knocked out fi rst
Installation of base/pedestal on the
burnchamber
Fig. 5
4. Carefully lay the stove down on its back. Rest the stove on
a pallet and three packaging frames.
Fig.6
B
A
B
B
Fig. 7
A
5. Before installing the base, the shelf (Fig. 4-A) and internal
back plate (Fig. 4-B) must be removed. Push the base
up to the burn chamber and secure it fi rmly with the four
screws (M8 x 25 mm) and washers provided. See Fig. 7 B.
ENGLISH
B
B
7