Jøtul F481 Installation And Operating Instruction page 8

ENGLISH
Fig. 9
A
A
6. Loosen the height adjustment screws slightly (A) beneath
the product so that they can be screwed by hand. NB: If the
optional glass fl oor plate is to be installed, the base must
be raised approximately 8 mm off the fl oor so that it can be
pushed under the front edge of the base.
Fig. 10
7. Carefully remove the wooden pallet.
8. Place a packaging frame (A) crosswise underneath the
base/pedestal/leg and cardboard packaging in front of/
beneath the product to prevent it from making marks on
the fl oor. Carefully raise the stove and stand it in its proper
place (fi g 1). Remember to position it straight above or
behind the external air supply, whichever is applicable.
9. Place the top plate (fi g. 3 A) temporarily in place and
level the fi replace. If the stove is not standing level, adjust
the screws shown in fi g. 9 A until the product is perfectly
straight.
10. If the control handles (Fig. 3C) are diffi cult to pull out, see
step 4.6
8
4.9 Location of approval label
The approval label must always be affixed to the wire and
positioned as illustrated in fi g. 11.
Fig. 11, Base
A
A
Fig. 11, Pedestal
A
A
A