Source - Onkyo TX-SR444 Basic Manual

DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting Item Default Value
Neo:6 Music 2
Center Image
Theater-Dimensional
Make the settings for Theater-Dimensional listening mode.
Setting Item Default Value
Listening Angle Wide
● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening
Angle" and 40° if you have selected "Wide".
Setting Details
Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center
while selecting a larger value spreads the
sound field of the front channel to left and right.
Setting Details
To enhance the effect of Theater-Dimensional,
select the actual angle of the left and right
front speakers as it appears from the listening
position.
"Narrow": Less than 30°
"Wide": Greater than 30°
4� Source
Make settings for input sources, such as volume difference adjustments for each input
selector for the connected equipment. When you select a desired input to check the audio,
start playback of the connected device.
IntelliVolume
Setting Item Default Value
IntelliVolume 0dB
Name Edit
Set an easy name to each input. The set name will be shown on the main unit display.
Select the input selector to configure.
Setting Item Default Value
Name ---
● This cannot be set if the "TUNER" or "BLUETOOTH" input is selected.
Advanced Settings (Setup Menu)
Setting Details
Adjust the volume level difference between the
devices connected to the unit. Select a value
between "-12dB" and "+12dB". Set a negative
value if the volume of the target device is larger
than the others and a positive value if smaller.
Setting Details
Select a name registered in the unit and replace
the currently selected input selector name with
it.
● The same name cannot be used for more
than one input selector.
En-21