Changing The Plug - Russell Hobbs RHMF18 Instructions & Warranty

WARNING:
Unplug from electrical supply source before cleaning. After servicing, any safety device (including grilles and
blades) must be reinstalled or remounted as previously installed. Use soft damp cloth then wipe with dry cloth.
Do not use harmful cleaners. Do not bend the blades.
If the plug and supply cord are damaged, it must be replaced by the manufacturer, its service agent or a
suitable qualified person in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.

Changing the Plug

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other power sources may
damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow= Earth
Blue = Neutral
Brown = Live
PLEASE AFFIX YOUR PROOF OF
IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED.
PURCHASE/RECEIPT HERE
W A R R A N T Y