Storing The Appliance; Changing The Plug - Russell Hobbs RTF-40 Instructions And Warranty

Table of Contents



Do not use bleach or other abrasive substance or solvents to

clean your appliance as it can be damaging to the finish.



Do not immerse the appliance in water or any other liquid, or hold

it under a running tap to clean.



To remove stubborn spots/marks, wipe the surfaces with a cloth

slightly dampened in soapy water or mild non-abrasive cleaner.

Rinse and dry with a clean, dry, soft cloth.

STORING THE APPLIANCE



Unplug the unit from the wall outlet and clean all the parts as

instructed above. Ensure that all parts are dry before storing.



Store the appliance in its box or in a clean, dry place.



Never store the appliance while it is still wet or dirty.



Never wrap the power cord around the appliance.

Should the need arise to change the fitted plug, follow the instructions below.

This unit is designed to operate on 220V-240V current only. Connecting to

other power sources may damage the appliance. Connect a three-pin

plug as follows:

The wires in this mains lead are coloured in accordance with the following

code:

Green/Yellow = Earth

Blue

= Neutral

Brown

= Live

Table of Contents