Table of Contents
Advertisement
8. Programmable Features
2. Press the soft key ({SELECT}) at "Ringer
setting".
3. Scroll to "Incoming call." by pressing
{v} or {e}, then press the soft key
({SELECT}).
4. Press {v} or {e} repeatedly to select the
desired setting.
5. Press the soft key ({SAVE}).
6. Press {OFF}.
– Base unit incoming call tone
Use the handset.
1. Press {MENU}.
2. Scroll to "Initial setting" by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Scroll to "Set base unit" by pressing {v}
or {e}, then press the soft key ({SELECT}).
4. Scroll to "Incoming call." by pressing
{v} or {e} repeatedly, then press the soft
key ({SELECT}).
5. Press {v} or {e} repeatedly to select the
desired setting.
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Note:
L You can also program the base unit incoming
call tone with the base unit (feature #73 on
page 79).
Setting the Call Waiting Deluxe service
To use the Call Waiting Deluxe service, see page
51.
Make sure the base unit and the handset are
not being used.
1. Press {MENU}.
2. Scroll to "Initial setting" by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Scroll to "Set tel line" by pressing {v}
or {e}, then press the soft key ({SELECT}).
4. Scroll to "C.WTG options" by pressing
{v} or {e}, then press the soft key
({SELECT}).
5. Press {v} or {e} repeatedly to select the
desired setting.
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Note:
L You can also set this feature with the base
unit (feature #57 on page 79).
84
Setting the Talking Call Display feature
See page 43 for details on the Talking Call
Display feature.
– Handset Talking Call Display
1. Press {MENU}.
2. Scroll to "Talk Caller ID" by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Press {v} or {e} repeatedly to select the
desired setting.
4. Press the soft key ({SAVE}).
5. Press {OFF}.
– Base unit Talking Call Display
Use the handset
1. Press {MENU}.
2. Scroll to "Initial setting" by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Scroll to "Set base unit" by pressing {v}
or {e}, then press the soft key ({SELECT}).
4. Scroll to "Talk Caller ID" by pressing
{v} or {e}, then press the soft key
({SELECT}).
5. Press {v} or {e} repeatedly to select the
desired setting.
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Changing the ring setting in TAM/FAX
mode
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
"2", "3" (default), "4", "5", "6", "7" or "Toll
saver". See page 59 for details.
1. Press {MENU}.
2. Scroll to "Initial setting" by pressing
{v} or {e}, then press the soft key
({SELECT}).
3. Press the soft key ({SELECT}) at "Set
answering".
4. Press the soft key ({SELECT}) at "Number
of rings".
5. Press {v} or {e} repeatedly to select the
desired setting.
L You can also select the number of rings by
pressing {0} ("Toll saver"), or {2} to
{7}.
6. Press the soft key ({SAVE}).
7. Press {OFF}.
Advertisement
Table of Contents
