Table of Contents
Advertisement
3. Telephone
To put a call on hold
Press {HOLD/INTERCOM} 2 times.
L "Hold" will be displayed.
L To release the hold, press {TALK} or {SP-
PHONE} on the handset or {SP-PHONE} on
the base unit.
L If you do not press a button for more than 6
minutes, beeps will start to sound and the
Ringer/Message alert indicator (1) will flash
rapidly. After 4 additional minutes on hold, the
call will be disconnected.
To redial the last number dialed from the
handset
Press {TALK} or {SP-PHONE}, then press
{REDIAL}.
To redial using the redial list (Memory
redial)
The last 5 phone numbers dialed from the
handset are stored in the redial list.
1. Press {REDIAL}.
L The last number dialed will be displayed.
2. Press {v} or {e} repeatedly to select the
desired number.
L You can also scroll through the list by
pressing {REDIAL} repeatedly.
L To delete the displayed number, press the
soft key ({ERASE}).
L To exit the list, press {OFF}.
3. Press {TALK} or {SP-PHONE}.
3.1.2 With the base unit
{MIC}
{A}{B}
{HOLD}
{MUTE}
{SP-PHONE}
1
Press {SP-PHONE}.
36
{REDIAL/PAUSE}
2
Dial the telephone number.
L When the other party answers, talk into
{MIC}.
3
When finished talking, press {SP-PHONE}.
Speakerphone operation
L Adjust the base unit speaker volume using
{A} or {B}.
L Talk alternately with the caller in a quiet
room.
L If the other party has difficulty hearing you,
press {B} to decrease the speaker
volume.
L If the other party's voice from the speaker
cuts in/out during a conversation, press
{B} to decrease the speaker volume.
To mute your conversation
During a call, you can mute your unit so the other
party cannot listen to you. When the call is
muted, you will be able to hear the other party.
Press {MUTE}.
L "SP-PHONE MUTE" will be displayed.
L To release the mute, press {MUTE}.
To put a call on hold
Press {HOLD}.
L "HOLD" will be displayed.
L To release the hold, press {SP-PHONE} on
the base unit or press {TALK} or {SP-
PHONE} on the handset.
L If you do not press a button for more than 6
minutes, beeps will start to sound. After 4
additional minutes on hold, the line will be
disconnected.
To redial the last number dialed from the
base unit
Press {SP-PHONE}, then press
{REDIAL/PAUSE}.
Advertisement
Table of Contents
