Blade BM5000S User Manual page 32

Update & Backup
After choosing "Setup" icon and selecting "Update & Backup" item, Press OK key to enter into the menu.
Make sure the USB is connected.
1. Upgrade by network: You can download new software to this receiver by network
2. OTA: When selecting this item, there will be a sub-menu to set up parameters.
3. Image backup: Store the software backup to USB memory device (supports user database/ Back All/
Application 1)
4. Image upgrade: You can download new software to the receiver by external USB memory device
When the cursor on the Image Upgrade, press OK key to start the image upgrade.
Move the cursor on the Upgrade Menu, the upgrade file will display on the left menu, you must select
the correct file (the format like *SSU), when the cursor on the upgrade file, press OK key to start USB
upgrade.
31