Blade BM5000S User Manual page 21

1. Satellite: In this item, press [Vol+/-] key to switch Satellites and press [OK] key to enter satellite list, for
you to select directly
2. LNB Freq: In this item, press [Vol+/-] key to select the parameter. Option is
5150,5750,9750,10600,10750,11300,11475,17250,18250,19250,20250,21200,5150/5750,
9750/10600, 9750/107500 and MDU-1,MDU-2,MDU-3,MDU-4
3. DiSEqC1.0/1.1: You can use [Vol+/-] key to switch options. There are several options for your
selection:
DiSEqC1.0: NONE,1/4,2/4,3/4,4/4,ToneburstA, ToneburstB
DiSEqC1.1: NONE,1/16,2/16,...,16/16
4. 22K: You can use [Vol+/-] key to switch "ON / OFF". When this item is switched to "ON", receiver will
receive TV and radio input signal from 22K port. If the item is switched to "OFF", the receiver will
receive all signals from 0K port
Notice!
When you choose LNB type "****/****", you can not modify 22K.
5. Polarity: In "Polarity" item, [Vol+/-] key to switch "OFF, 18V, 13V, 13/18V" functions
6. Motor：You can use [Vol+/-] key to set Antenna type by Motor
7. Unicable：You can use [Vol+/-] key to set unicable enable or none
Motor Setting:
When the focus is on the satellite list,
you can press OK key to setting
which satellite will be selected with
LNB.
You can press Red key to set
SAT/TP Manager.
Press Green key to start channel
search.
Press Blue key to update
transponder from network.
When selecting Motor Type: USALS
20