Blade BM5000S User Manual page 22

Automatic SAT Scan
You can find sub-menus for Satellite, Transponder, Scan Type, Service Type, Scan mode，Scan select，
Signal Quality Bar, etc. Press Green key to start channel search.
Manual Scan
You can find sub-menus for Satellite, Transponder, Polarity, Signal Quality Bar, etc. and press Green
key to start channel search by current parameters
If you select "DiSEqC1.2", "Local
Longitude / Local Latitude" is not
available. It will show the screen
as to your left, here
When the highlight on the mode
item, you can use [Volume Up/
Volume Down] key to set Motor
function
1. Satellite: Select the satellite that
you want to search.
2. Transponder：Select the desired
TP (transponder).
3. Scan Type：All, FTA
4. Service Type：All, TV, Radio
5. Scan mode： ALL TP, One TP,
One TP+NIT, ALL TP+NIT, Blind
6. Scan select：Single Sat, All Sat
7. Signal Strength / Quality Bar:
Shows the strength and quality of
the signal from the LNB
21