Blade BM5000S User Manual page 30

Time
When you enter the Time Menu, you can see: Summer Time, Sleep Time, Set Time, Set Date, Time
Zone and GMT usage.
TV setup
When you enter into "TV System" menu, you can set TV Saturation, TV Contrast, TV Brightness, Auto
Switch Off, Standby Mode, Digital Audio output, TV Resolution, Video Output, TV Mode and TV Format.
1. TV Saturation: Press [Vol+/-] KEY to set TV saturation
2. TV Contrast: Press [Vol+/-] KEY to set TV contrast
3. TV Brightness: Press [Vol+/-] KEY to set TV brightness
4. Auto Switch Off: OFF/3 Hours/4 Hours/ 5 Hours
5. Standby Mode: Fake/Real
6. Digital audio output: To set the both SPDIF and HDMI's digital audio output mode. It has options:
LPCM and RAW
7. TV resolution: You can switch video resolution circularly by the sequence 576i <-> 576P
<->720p_50Hz <->1080i_50Hz<->AUTO<->1080p_50Hz.
8. Video Output: To set video output mode RCA (CVBS) / SCART(CVBS)/ SCART(RGB)/ YCbCr(YUV)/
HDMI
Sleep Time: When you set a sleep
timer and the time arrives, the
system will enter into standby
automatically.
It will switch the mode between
Sleep Timer Off /15/30/45/60/90/120
minutes.
GMT Usage: Select On or Off.
1. If you select GMT Off, you can
adjust the current
Date/Hour/Minute.
2. If you select GMT On, you can
adjust the "Time Zone": To switch
"Time Zone" value and the range
are "-12:00 ~ +12:00" increase
each half hour progressively.
29