Disassembly and Assembly Instructions
11-2. Assembly Instructions
solder receiver and speaker module.
1)
1
2) Assemble speaker module to the pba
2) Place the BT INTENNA on the correct position in
the picture below.
1) Handle the BT F-PCB with care not to be torn.
1) Put camera and motor into speaker module
3
2) Connect the camera connector.
1) Handle the F-PCB with care not to be torn.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Solder the mike with camera f-pcb.
2
2) bond the soldering part.
-
+
1) Check the polarity of motor
1) Solder a lcd module.
4
2) attach the lcd into PBA
1) Handle the key F-PCB with care not to be torn while
assembling.
11-4
caution