1) Assemble shield can
5
1) 4 clip must be assembled properly
1) Assemble the PBA with rear
7
2) After assembling the PBA and rear, press them
properly.
1)
Be careful not to make any scratch or damage on the
exterior.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) Assemble the intenna
6
2) put the mike f-pcb into intenna
2
1) Handle the F-PCB with care not to be torn.
8
1) Assemble the keypad with rear
2)
After assembling the keypad and rear, press
them properly.
1)
Be careful not to make any scratch or damage on the
exterior.
11-5
3
1