Disassembly and Assembly Instructions
1) Separate the PBA from the rear
5
1) Be careful not to make any damage to the pba
1)Disassemble shield can from the pba
7
1) Be careful not to make any damage to the pba
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1)Pull out the mike from intenna
6
2)Disassemble intenna from the pba
①
2
1) Be careful not to make any damage to the intenna
1) Separate the window slowly.
8
2) Detach the lcd module after resoldering lcd
module f-pcb
1) Separate slowly with no damage to the LCD module.
11-2
3
1
HOOK POSITION
②