Table of Contents
Advertisement
1) Separate the camera connector
9
2) Separate the camera and motor from speaker
module
1)
Separate slowly with no damage to f-pcb
1) Detach BT intenna from speaker module
11
2) Detach speaker module from pba
3) Resolder receiver and speaker module
1) Be careful not to make any damage to the BT intenna
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) Detach motor after reslodring 2 points
10
2) Unscrew 2 bolts
3) Detach receiver from speaker module
1) Be careful not to make any damage to the F-PCB.
11-3
Advertisement
Table of Contents
