Pioneer HTP-072 Service Manual page 29

5
[3] The unit's operation when a error is detected
[Purpose]
• The unit's operation when a DC/OVER/TEMP error is detected is described here.
• How to cancel the status after detection of a DC error is described here, because no key input will be accepted after
a DC error detection.
[Basic operations]
3.1 DC (AMP is abnormality) error detection
Key Operation
(Normal display)
(DC detection)
(Auto)
(RECEIVER POWER OFF)
If the AC power cord is plugged in while the AVR is prohibited from being ON because of DC detection, the HDMI LED will
flash at intervals of 500 msec.
3.2 OVERLOAD (overcurrent) error detection
Key Operation
(Normal display)
(OVERLOAD detection)
(Auto)
(RECEIVER POWER OFF)
5
6
FL Display
usually
FL Display
usually
HTP-072
6
7
Time (sec.) Description of Indications
Normal display
Time (sec.) Description of Indications
Normal display
7
8
A
B
C
D
E
F
29
8