The Serpent Cobra GT RTR is the best entry in the world of rc racing. Affordable and a very good basis to start your racing carreer. The Serpent Cobra GT RTR, is based on the high-end competition version of the Cobra GT and shares geometry and many parts.
Read this first ● This is a highly technical hobby product, intended to be ● Only operate this car in a safe environment, like a used in a safe racing environment. This car is capable special racing track or a closed parking lot. of speeds in excess of 80 km/h or 50mph.
Equipment Included with your model ● Serpent modelcar, factory assembled and set-up ● Dragon-RC DTS-1 transmitter (as shown or similar) ● Dragon-RC DESC speedcontroller ● Dragon-RC brushless motor ● Dragon-RC racing tyres, pre-mounts ● Dragon-Rc digital servo MG ● Dragon-RC prepainted and pre-cut bodyshell...
Model specs/overview Shocktower front Shockabsorbers Front bodymount Race-tyres Front wishbone Steeringblock Front axle Steering link Front camber link Steering system Steering servo Brushless motor Speedcontroller Receiver Chassis Center diff Spur gear Battery cover Central rear driveshaft Differental Shocks rear Rear wishbone Rear camber link Rear anti-roll bar Shocktower rear...
Basic tunning Springs ● Springs: by using a softer spring you will have more sag, more chassis roll/lean, more dive and a less responsive car this might be better on low-grip surfaces; by using a harder spring you have less sag, less body lean, less dive and a more responsive car.
In case of gritty feel, the silicone oil may need replacement. The full assembly manual of this model is available online; check on www.serpent.com and type your modelnumber, partnumber, or select your car from the car-page; go to the download section in the menu and download the full manual.
Need help?
Do you have a question about the Cobra GT RTR and is the answer not in the manual?
Questions and answers