Advertisement
REMOVABLE
OVEN
RACKS
Be careful
not to scratch
the oven finish when
installing
or removing
oven racks.
To Install:
1. Sat the raised beck edge of the rack on a pair of rack
guides°
2. Push the rack In until you resch the bump In the rack
guide, then lift the front of the rack and push the rack
all the way In.
TO remove:
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one
folding oven rack.
The folding rack can be easily stored away when not In
use.
NOTE:
The recks
are designed
with stop licks.
When the racks
are placed
correctly
on
the rack supports
end extended
from the
oven,
the stop lock prevents
the racks
from tilting
when you are removing
foods
from the oven or place food on them.
NOTE:
Forbestperlormance,
removeovenrimks
dining
• €lean
cycle,
if oven racks are
left in the range daring
a self-clean
cycle,
they
will
darken,
lose their
luster
and
become
herd to slide.
If you choose
to leave
the racks
in the
oven,
you can polish
the edges
of the
racks
with steel wool end apply a small
amount
of vegetable
oil to the rack edges
after
the self-clean
cycle.
BUMP IN
RACK _
REMOVABLE
OVEN
DOOR
To remove:
1. Open the door to the stop position (see Illustration).
2. Grasp the door at each side and lift up and off the
hinges. Do not lift doorbythe handle. Glass breakage
or damage to the door may result.
NOTE: When the door is removed
and hinge arms
are at stop position,
do not bump or try to move
the
hinge
arms.
The
hinges
could
snap
back
causing
an injury
to the hands or damage
to the
porcelain
on the front oi the range.
Cover the
hinges with toweling
or empty
towel
rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots st the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
still
be in the
stop
position.
2. Slide the door down onto the hinges as far as it will
go and close the door.
STOP (BROIL) POSITION
HINGE
15
NEMNT75-1
Advertisement
