Optical Parts Disassemblies
This chapter describes disassemblies procedure of the optical parts. Disasemblies should be made following to the
SEQ No. indicated on the right of each item.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of per-
formance and product safety.
z Mirrors & Optical Filter removal
A : (T4 x 10) x 2 on holder
B : (M4 x 8) x 4 on duct holder
C : (M3 x 10) x 4 on prism mirror
Optical Filter-UV/IR
B
A
B
Mirrors
Printed Part
Printed Part
No.(Behind)
C
No.
Printed Part
Optical Filter-UV/IR
No.
- 23 -
z
........ SEQ No. in Mechanical Disassemblies
z
........ SEQ No. in Optical Parts Disassemblies
SEQ No.
zxz
Fig.1