Installing The Speakers; Removing The System Board - Dell Precision 3510 Owner's Manual

Installing the speakers

1. Place the speakers into the slots on the computer.
2. Route the speaker cable through the retention clips through the routing channel.
3. Connect the speaker cable to the connector on the system board.
4. Install the:
a. dock frame
b. WLAN
c. WWAN
d. hard drive assembly
e. battery
f. base cover
5. Follow the procedure in

Removing the system board

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. memory module
d. hard drive assembly
e. WLAN card
f. WWAN card
g. keyboard
h. dock frame
i. power connector port
3. Disconnect the speaker cables [1], touch pad and system board cables [2, 3] from the system board.
30
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
computer.
computer.