Removing Dock Frame/Installing Camera; Installing The Camera; Removing The Dock Frame - Dell Precision 3510 Owner's Manual

a. Disconnect the camera cable from the connector on the display assembly [1].
b. Lift the camera away from the display assembly [2].

Installing the camera

1. Place the camera on the display assembly.
2. Connect the camera cable to the connector on the display assembly
3. Install the:
a. display bezel
b. display assembly
c. WWAN
d. WLAN
e. battery
f. base cover
4. Follow the procedure in

Removing the dock frame

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. hard drive assembly
d. WLAN card
e. WWAN card
3. To remove the dock frame connectors:
a. Remove the screws that secure the dock frame to the computer [1].
b. Remove the screw and lift the SSD plate from the computer [2, 3].
NOTE: This step is required only if the PCIe SSD card is removed.
22
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
system.
computer.