Table of Contents
Related Manuals for Worx WX701
Summary of Contents for Worx WX701
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUcTIONS WX700 WX701 Angle grinder WX702 WX707...
-
Page 2: General Power Tool Safety Warnings
Use of e) When operating a power tool dust collection can reduce dust-related outdoors, use an extension cord hazards. suitable for outdoor use. Use of a cord WX700 WX701 Angle grinder WX702 WX707... - Page 3 This will cause loss of control. ensure that the safety of the power tool is 7. Do not use a damaged accessory. maintained. Before each use inspect the WX700 WX701 Angle grinder WX702 WX707...
- Page 4 Kickback is the result of power tool misuse spinning accessory. and/or incorrect operating procedures or WX700 WX701 Angle grinder WX702 WX707...
- Page 5 Investigate and take corrective the operator. The guard helps to protect action to eliminate the cause of wheel operator from broken wheel fragments binding. WX700 WX701 Angle grinder WX702 WX707...
- Page 6 Wear dust mask Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice WX700 WX701 Angle grinder WX702 WX707...
- Page 7 WX700 WX701 Angle grinder WX702 WX707...
- Page 8 ADjUStMeNt NUt SPINDle GUARD clAMPING leveR 10. WHeel GUARD foR GRINDING 11. DISc* 12. WHeel GUARD foR cUttING* 13. INStAlock SDS flANGe*(foR Wx701.2) *Not all the accessories illustrated or described are included in standard delivery. WX700 WX701 Angle grinder WX702 WX707...
-
Page 9: Technical Data
TECHNICAL DATA Type Wx700 Wx701 Wx701.1 Wx701.2 Wx702 Wx702.1 Wx702.2 Wx707 Wx707.1(700-749 -designation of machinery, representative of Angle Grinder) Wx701 Wx702 Wx707 Wx700 Wx701.1 Wx702.1 Wx707.1 Wx701.2 Wx702.2 Rated voltage 220-240V~50/60Hz Rated power 860W 710W 710W 860W Rated speed 12,000/min... - Page 10 Auxiliary handle Anti-vibration auxiliary handle(Wx707 Wx707.1) (fig A) INStAlock tool-less flange (Wx701.2 Wx702.1 Wx707.1) ® We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake.
-
Page 11: Operating Instructions
Wheel Guard for cutting WARNING! For cutting metal,always work with the wheel guard for cutting(12). The wheel guard for cutting (12) is mounted in the same manner as the wheel guard for grinding(10) . WX700 WX701 Angle grinder WX702 WX707... - Page 12 Keeping the lock button pressed in, tighten the outer flange with the spanner provided. (See Fig. C3) Using INStAlock tool-less flange(Wx701.2 ® Wx702.1 Wx707.1) Lock the grinder spindle with the spindle lock button. To tighten the INSTALOCK tool-less Flange firmly ®...
-
Page 13: Working Hints For Your Angle Grinder
Dispose of old the disc. When cutting, only cut in the WX700 WX701 Angle grinder WX702 WX707... -
Page 14: Environmental Protection
13 Amp fuse approved to BS1362 Connect Blue to N Brown L (live) (neutral) Outer sleeve Cable grip firmly clamped WX700 WX701 Angle grinder WX702 WX707... -
Page 15: Declaration Of Conformity
Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UK Declare that the product, Description WoRx Angle grinder Type Wx700 Wx701 Wx701.1 Wx701.2 Wx702 Wx702.1 Wx702.2 Wx707 Wx707.1(700-749 -designation of machinery, representative of Angle Grinder) Function Peripheral and lateral grinding... - Page 16 Copyright © 2013, Positec. All Rights Reserved.