Table of Contents
Advertisement
Hex Dump
98
In this mode, all data received from the computer is printed in hex code instead of the normal ASCII
characters. Function codes forthe printer (CR, LF, HT, etc.) are not executed. This mode is very useful
to debug programs.
To Enter the Hex Dump Mode:
r-i ...
MICRO LF...
I
E:J001-~1
FONT
PITCH
FORM LENGTH
EXIT
To Release the Hex Dump Mode:
OFF POWER
ON
.J
o[ ~
[I
OFF POWER
ON
While pressing both (LF) and (FF) , turn the
power on.
Turn the power off, then back on.
Advertisement
Table of Contents
