Table of Contents
Advertisement
Paper Feed Selection
20
This printer has two paper feed mechanisms to support 3 paper paths. One mechanism is TRACTOR
mode for continuously fed paper. In the tractor mode you can choose between PUSH or PULL.
The other paper feed mechanism is FRICTION mode. In the friction mode you can feed single sheets
or envelopes through the top. The optional KX-PT10 Cut Sheet Feeder will accommodate automatic
feeding of single sheets, from the top paper path.
Push Tractor Mode" [] "(Rear Feeding)
-
fanfold paper (1 part)
--"
-
-
multipart forms consisting of 2 parts
,.-1
~
~'----
(
®
~Dy
'"
Rear
feeding
Pull Tractor Mode" [] "(Bottom Feeding)
-
multipart forms consisting of 3 or 4
,.-1
G6
, L -
parts
(
CE5
{:fj
..
·:6'·~
"',,:"
-labels
-
fanfold paper (1 part)
Bottom feeding
Friction Mode"
Ll "
- single sheets
#
Top
(The KX-PT10 allows you to automatically
feeding
feed up to 80 sheets of 20 Ib paper.)
,.......1
~/
-envelopes
(
~0
.:.!
Note:
• When feeding paper from the bottom, do not use reverse line feed. Paper may not feed
correctly and print quality may not be optimum .
• Paper Parking is not available when the paper is installed from the bottom.
' 1 '
•
Multipart forms consisting of 2 parts may be used for rear feeding (Push mode). For 3 or
L
_~~4 ~art fo~~~e
recommend
botto~~f~e~~g ~P_ul~odel ~~ ~~mum
print
q_ua_l_ity~.~~~-,
Advertisement
Table of Contents
